Mar 30


www.funnyonesies.net Onesies with a little zing - Funny Onesies! Demonstration of the air hogs havoc heli helicopter - tips and tricks. Buy it at www.stevehasballs.com For fast forward motion, hold the copter at about 45 degrees, and then just release. For a “boomerang effect”, push the copter forward horizontally, and then watch out - the copter will come back at you! Remember to add additional nose weight to give your copter more forward motion. For more info on this helicopter, please visit our website at: www.stevehasballs.com

Technorati Tags: , , , , , ,

16 Responses to “Airhogs Havoc Heli (Picco Z) RC Helicopter Tips and Tricks”

  1. Eurylochuz Says:

    You broke it. Thats whats wrong

  2. sargentsween47 Says:

    all these videos are crap.

  3. lifegaurd Says:

    dude we all noe that ur so stupid!!

  4. colt2271 Says:

    dude didnt yours come with spare parts i bought the new light glow in the dark and it came with 2 spare rotor blades 3 aluminum sticker weights 1 helicopter a controller and i think thats all but yours should have came with box unless the old ones dont have spare parts but i think they do

  5. Greengromit Says:

    I have a havoc heli. I broke off the tail rotor on accident. The wires were still attached. I superglued it back in place, but now the heli keeps turning in circles and cant fly. What is wrong?

  6. defixje Says:

    You can also use a needle then it goes not that fast forward and you can pretty hover with it to

  7. jeesh123 Says:

    u should get mini Mosquito it awesome!! flys forward and backwars left to right up and down u name it

  8. Shurst5151 Says:

    I put an eraser head off of a pencil and it works great

  9. leokonfino Says:

    BEST DEAL rcmicrocopters dot com

  10. ddude160 Says:

    um dude….u kinda bite…

  11. lollpoppy Says:

    where did u get it i want one to but thanks for the tricks

  12. ukchay Says:

    I cut my 2 little fins off and shaved down all thw weight that I could. The thing climbs like a motherfucker and is more controllable.

  13. trxspirit Says:

    i used a quarter, mine goes pretty fast now, but it couldn;t hover anymore

  14. okami101 Says:

    I lost 2 of the pieces so I took some tape from the packaging and taped a dime to the tip,Works perfectly

  15. EnderTheTrader Says:

    Hi Okami,

    They give you three pieces of Aluminum tape with the copter; what you get are very small squares - about 0.5 cm squared. They were enough to give my copter forward motion, but I had a roll of Aluminum tape handy, so I added an equivalent of three more squares. Works GREAT!!

  16. okami101 Says:

    What should I use to weigh down the nose? I got lots of tape from this thing

Leave a Reply